REMO-HSE high voltage assembly groups - HBR- and SHBR-Series
HBR and SHBR
High Voltage Assembly Groups
up to 100kV

Open Frame

Our high-voltage assembly groups are, in contrast to our high-voltage modules, open-frame high-voltage power supplies. They are suitable for integration into closed and touch-proof enclosures.
Both assembly groups consist of a high-voltage multiplier and control electronics mounted on a mounting bracket and deliver a maximum of 100kV at a maximum current of 500μA.

HBR Assembly Group

REMO-HSE high voltage assembly groups - HBR-Series
  • High voltage ramp-up time between 0,5s and 5s adjustable
  • Operating mode: voltage controlled
  • Measurement outputs for actual voltage and current values
  • Automatic cut-off in case of overcurrent, overvoltage and overtemperature
  • Error message in the event of a high-voltage fault
  • Fold-Back Kennlinie
  • Output power up to a maximum of 50W
Download   Data Sheet (en)   
  Data Sheet (de)   
Features

The assembly group, which delivers a maximum of 100kV at a maximum current of 500μA, is available with positive, HBR-30-100k-500-R0, or negative polarity, HBR-30-(-100k)-500-R0. The output voltage is adjustable between 0% and 100% of the nominal output voltage and the actual voltage and current values can be monitored via measurement outputs for external display instruments.

Special Features

You can adjust both the high-voltage starting time and the current-voltage characteristic on the board by means of a potentiometer. Another feature here is the fold-back mode, in which the short-circuit output current is smaller than the maximum output current.

Applications

This assembly group is used almost exclusively in wet paint and powder coating as well as flocking.

Interested?

Then contact us without obligation. Click here to send email:

SHBR Assembly Group

REMO-HSE high voltage assembly groups - SHBR-Series
  • High voltage ramp-up time between 0,5s and 5s adjustable
  • Operating mode: voltage controlled
  • Analogue interface
  • Automatic cut-off in case of overcurrent, overvoltage and overtemperature
  • Fold-Back-Mode
  • dI/dt-cut-off
  • Error message in the event of a high-voltage fault
  • Output power up to a maximum of 50W
Download   Data Sheet (en)   
  Data Sheet (de)   
Features

The assembly group, which delivers a maximum of 100kV at a maximum current of 500μA, is available with positive, SHBR-30-100k-500, or negative polarity, SHBR-30-(-100k)-500 The output voltage is adjustable between 0% and 100% of the rated output voltage. The actual voltage and current values can be monitored via measurement outputs for external indicating instruments or alternatively via an analogue interface, which can also be used to set the voltage and monitor operation.

Special Features

You can adjust both the high-voltage starting time and the current-voltage characteristic on the board by means of a potentiometer. If a reduced short-circuit current is required, the fold-back mode can also be used here.
In addition, the assembly group also has a spark detection and cut-off (dI/dt cut-off), which can be set on the board with a potentiometer.

Applications

This assembly group is used almost exclusively in wet paint and powder coating as well as flocking.

Interested?

Then contact us without obligation. Click here to send email: